1 Introduction 2 Hardware Spec 3 Software Features 3.1 uboot 3.2 UbuntuCore 16.04 3.3 Ubuntu OLED 3.4 Debian 3.5 Debian for NAS Dock 4 Diagram, Layout and Dimension 4.1 Layout 4.2 Dimensional Diagram 5 Get Started 5.1 Essentials You Need 5.2 TF Cards We Tested 5.3 Make an Installation TF Card 5.3.1 Get Image File 5.3.2 Make Ubuntu-Core with Qt-Embedded Image Card 6 Work with Ubuntu-Core with Qt-Embedded 6.1 Run Ubuntu-Core with Qt-Embedded 6.2 Configure System with npi-config 6.3 Ethernet Connection 6.4 Login via SSH 6.5 Extend TF Card's rootfs Section 6.6 Connect USB WiFi to NEO2 6.7 Connect NanoPi NEO2 to USB Camera(FA-CAM202) 6.8 Play & Record Audio 6.9 Access GPIO Pins/Wirings with WiringNP 6.10 Access GPIO Pins/Wirings with RPi.GPIO_NP 7 Make Your Own Ubuntu-Core with Qt-Embedded 7.1 Mainline U-boot & Linux(64 bit) 7.2 Use Allwinner's BSP 7.2.1 Preparations 7.2.2 Install Cross Compiler 7.2.3 Compile lichee Source Code 7.2.4 Compile U-boot 7.2.5 Compile Linux Kernel 7.2.6 Clean Source Code 8 Connect External Modules to NEO2 8.1 DIY NAS Server with 1-bay NAS Dock & NEO2 8.2 Connect Python Programmable NanoHat OLED to NEO2 8.3 Connect Python Programmable NanoHat Motor to NEO2 8.4 Connect NanoHat PCM5102A to NEO2 8.5 Connect Arduino Compatible UNO Dock to NEO2 8.6 Connect Power Dock to NEO2 8.7 Connect NanoHat Proto to NEO2 9 3D Printing Files 10 Resources 10.1 Datasheet & Schematics 11 Update Log 11.1 March-14-2017 11.2 April-5-2017 11.3 May-7-2017 11.4 May-17-2017 11.5 May-24-2017 11.6 June-4-2017 11.7 June-8-2017