NanoPi-2-Fire
    >>Nanopi series Comparison list
HardWare info for NanoPi-2-Fire

NanoPi Interface Feature

On NanoPi-2-Fire board, it have the follow interface:

  • Two UART Serial Port
  • One Ethernet Port
  • Two IIC bus
  • Two SPI bus
  • One DVP Camera interface
  • One TFT LCD interface
  • One Touchscreen interface
  • Up to 15 GPIO interface, more interface can be use as GPIO(UART, SPI, IIS, I2C)

More NanoPi interface info, download the NanoPi-2 schematic file.

NanoPi Interface

NanoPi Interface Details

GPIO1 Pin Define

Pin# IC Pin Note   Pin# IC Pin Note
1 VDD_SYS_3.3V Power Out 3.3V   2 VDD_5V Power In 5V
3 I2C0_SDA I2C bus 0 Data   4 VDD_5V Power In 5V
5 I2C0_SCL I2C bus 0 Clock   6 DGNA Power GND
7 GPIOD8/PPM GPIO    8 UART3_TXD UART3 TXD
9 DGND Power GND   10 UART3_RXD UART3 RXD
11 UART4_TX/GPIOB29 UART4 TXD   12 GPIOD1/PWM0 GPIO  
13 GPIOB30 GPIO    14 DGND Power GND
15 GPIOB31 GPIO    16 GPIOC14/PWM2 PWM2
17 VDD_SYS_3.3V Power Out 3.3V   18 GPIOB27 GPIO 
19 SPI0_MOSI SPI Bus 0 Master Output   20 DGND Power GND
21 SPI0_MISO SPI Bus 0 Master Iutput   22 UART4_RX/GPIOB28 UART4 RXD
23 SPI0_CLK SPI Bus 0 clock   24 SPI0_CS SPI Bus 0 Chip select
25 GND Power GND   26 GPIOB26 GPIO 
27 I2C1_SDA I2C bus 1 Data   28 I2C1_SCL I2C bus 1 Clock
29 GPIOC8 GPIO    30 DGND Power GND
31 GPIOC7 GPIO    32 GPIOC28 GPIO 
33 GPIOC13/PWM1 GPIO    34 DGND Power GND
35 SPI2_MISO/GPIOC11 SPI Bus 2 Master Iutput   36 SPI2_CS/GPIOC10 SPI Bus 2 Chip select
37 AliveGPIO3 GPIO    38 SPI2_MOSI/GPIOC12 SPI Bus 2 Master Output
39 DGND Power GND   40 SPI2_CLK/GPIOC9 SPI Bus 2 Clock
 
RGB LCDIF Pin Define
Pin# IC Pin Note
1,2 VDD_5V Power Out/In 5V
11£¬20£¬29,27-10,45 DGND Power GND
3-10 Blue LSB to MSB TFT LCD Blue Signal
12-19 Green LSB to MSB TFT LCD Green Signal
21-28 Red LSB to MSB TFT LCD Red Signal
30 GPIOB25 IO
31 GPIOC15 IO
32 XnRSTOUT From CPU Reset signal
33 VDEN Data Enable
34 VSYNC Vertical Sync. Signal
35 HSYNC Horizontal Sync. Signal
36 LCDCLK LCD Video Clock
41 SCL2 IIC
42 SDA2 IIC
43 GPIOC16 IO
Debug Port CON1(UART0)
Pin# IC Pin Note
1 DGND Power GND
2 VDD_5V Power Out/In 5V
3 TXD0 UART0: Debug serial Port TXD
4 RXD0 UART0: Debug serial Port RXD
DVP Camera IF Pin Define
Pin# IC Pin Note
1,2 VDD_SYS_3.3V Power Out 3V
7,9,13,15,24 DGND Power GND
3 SCL0 I2C bus 0 Clock
4 SDA0 I2C bus 0 Data
5 GPH13 IO
6 GPJ12 IO
8 XCLK Clock
10 NC No Connector
11 VSYNC sync signal
12 HREF HREF
14 PCLK PCLK
16-23 Data bit7-0 Data bus

 

Mechanical Dimensions

More Mechanical Dimensions, download the NanoPi-2 dxf file.


Follow Us: 
Facebook | Google+ | Twitter
Market Mail : market@armdevs.com
Support Mail: support@armdevs.com
NanoPi Online Chat >
Work time: 09:00-18:00
Copyright @ 2014 to 2020 - FriendlyARM NanoPi Team